Skip to content
Products / 产品中心
Product Range
Casement window friction stay
- Delivers superior airtightness and exceptional wind pressure resistance
- Compatibility: Fits European standard C-slot (Eurogroove) profiles
- Each hinge boasts a maximum load capacity of 60kg
- Engineered with a dedicated stop block structure
- Effectively boosts the load-bearing capacity of the link arm
- Significantly enhances wind pressure resistance when the window is open
- Ensures steadier and more secure load support
180° Heavy-duty Inward-opening Window Friction Stay
- Leaf thickness: Double 3.5mm thick load-bearing leaves
- Max. load capacity: 55kg
- Construction: Equipped with solid rivets for superior load-bearing strength and durability
- Compatibility: Fits European standard C-slot (Eurogroove) profiles
- Max. opening angle: 175°
- Adjustability: Lateral (side) adjustment ±1.5mm; Compression (gasket depth) adjustment ±0.5mm
- Material: Stainless Steel 304 / 201 (optional)
3.5mm Thick Heavy-duty 90° Inward-opening Window Friction Stay
- Quick-Install Clip Hinge (Snap-On Mounting Type)
- Load-bearing leaf thickness: 3.5mm
- Max. load capacity: 45kg
- Profile compatibility: Fits European standard C-slot (Eurogroove) systems
- Max. opening angle: 88°
- Adjustment range: Lateral (side) adjustment ±1.0mm; Compression (gasket depth) adjustment ±1.0mm
- Material: Stainless Steel 201
- Surface finish: Vibratory finishing + Sandblasting
- Feature highlight: Quick-mount clip design enables faster and more convenient installation.
New Pivot-Type Hinge 5.0
- Load-bearing leaf thickness: 4.2mm
- Max. load capacity: 55kg
- Adjustability: Lateral (side) adjustment ±1.0mm; Compression (seal/gasket depth) adjustment ±1.0mm
- Construction: Solid rivets at 3 load-bearing points for enhanced strength and durability
- Compatibility: Fits European standard C-slot (Eurogroove) profiles
- Max. opening angle: 88°
- Material: Stainless Steel 201
New Pivot-Type Hinge 5.0
- Load-bearing leaf thickness: 4.2mm
- Max. load capacity: 55kg
- Adjustment range: Lateral (side) adjustment ±1.0mm; Compression (gasket depth) adjustment ±1.0mm
- Construction: Solid rivets at 3 load-bearing points for enhanced strength and durability
- Compatibility: Fits European standard C-slot (Eurogroove) profiles
- Max. opening angle: 88°
- Material: Stainless Steel 201
New Pivot-Type Hinge 5.0
- Load-bearing leaf thickness: 4.2mm
- Max. load capacity: 65kg
- Adjustability:
- Lateral (side) adjustment: ±1.5mm
- Compression (gasket/seal depth) adjustment: ±1.0mm
- Height adjustment: +1mm (upward only)
- Construction: Solid rivets at 4 load-bearing points for enhanced strength and durability
- Compatibility: Fits European standard C-slot (Eurogroove) profiles
- Max. opening angle: 88°
- Material: Stainless Steel 201
- Surface finish: Advanced zinc-alloy based treatment – zinc‑nickel alloy plating (automotive‑grade), with salt spray test performance up to 400 hours.
180° Heavy-duty Inward-opening Window Friction Stay
- Leaf thickness: Double 3.5mm thick load-bearing leaves
- Max. load capacity:70kg
- Construction: Equipped with solid rivets for superior load-bearing strength and durability
- Compatibility: Fits European standard C-slot (Eurogroove) profiles
- Max. opening angle: 175°
- Compression (gasket/seal depth) adjustment: ±1.5mm
- Material: Stainless Steel 304 / 201 (optional)
- Surface finish: Advanced zinc-alloy based treatment – zinc‑nickel alloy plating (automotive‑grade), with salt spray test performance up to 400 hours.
Model L Straight Square Spindle Handle
- Design: Minimalist square profile with clean, elegant lines
- Material: High-grade zinc alloy, fine tactile finish
- Surface finishing: Powder coating / Spray painting (optional)
- Compatibility: Fits a wide range of window profiles
- Standard colors: Black, White (Custom colors available upon request)
Model L Offset Square Spindle Handle
- Design: Minimalist square profile with clean, elegant lines
- Material: High-grade zinc alloy, fine tactile finish
- Surface finishing: Powder coating / Spray painting (optional)
- Compatibility: Fits a wide range of window profiles
- Standard colors: Black, White (Custom colors available upon request)
Two-Way Drive Lock Case
- Faceplate: Stainless Steel 304, ground finish
- Lock body: Stainless Steel 201, brushed finish
- Gear: Powder metallurgy (sintered) material for enhanced durability
- Installation: Snap-on clip design for quick and easy mounting
One-Way Base-less Drive Lock Case
- Faceplate: Stainless Steel 304, ground finish
- Lock body: Stainless Steel 201, ground finish
- Compatibility: Suitable for both base-mounted and base-less handles
- Endurance: Fatigue tested to ≥20,000 cycles
- Gear: Precision investment-cast stainless steel gear
Reverse Gear Self-Locking Base-less Handle
- Product Type: Base-less handle with reverse gear self-locking design
- Mechanism: Reverse gear engagement – the more the handle is used, the tighter it locks, effectively eliminating play or wobble common in conventional base-less handles, ensuring long-term reliability and a clean aesthetic.
- Compatibility: Suitable for both base-mounted and base-less lock cases.
- Surface finish: Spray painting (lacquering)
- Standard colors: Black, Grey, Silver (custom colors available upon request)
180° Screen Window Hinge (Pivot-Type)
- Design: Pivot-action mechanism for enhanced load-bearing performance
- Installation: Quick-mount, groove-free (no mortising required)
- Adjustability: Lateral (side) adjustment: ±1.0mmCompression (gasket/seal depth) adjustment: ±1.0mm
- Compatibility: Universal fit for European standard C-slot (Eurogroove) profiles
- Max. opening angle: 175°
- Material: Stainless Steel 304
- Surface finish: Ground finish
Guard Hinge (for Operable Guard/Security Windows)
- Application: Designed for mounting on operable guard windows (security screens)
- Opening angle: 90°
- Material: Stainless Steel 304
4-Piece Locking Point & Strike Plate Set
- Material: Stainless Steel 304
- Surface finish: Ground finish
- Installation: Quick-mount design for easy and convenient fitting
